Brook Crompton

 
 

W Aluminium

The W aluminium range covers products with outputs from as little as 0.07kW to 22kW in frame sizes WU-DA63S to WU-DA180L, in either 2,4,6 or 8 pole speeds.

They are widely used in a diverse range of applications from food and drink to water and sewage. From heating and ventilation to refrigeration.

Some of the benefits of aluminium over cast iron include high resistance to corrosion and atmospheric attack (except chlorine, salt-laden or sulphuric acid) and the fact that aluminium is approximately one third the weight of cast iron.
 
W Aluminium
 
 
 

W Cast Iron

The W cast iron motor range covers products with outputs from as little as 0.75kW to 400kW in frame sizes 80 to 355L. They are suitable for use within a diverse range of applications from food and drink to china clay production. From roller table drives to refrigeration.

Many applications often have adverse operating conditions including repeated starting and occasional overloading; the W cast iron range is well suited to these situations.

A virtual go anywhere motor, this cast iron range has a full 3-year guarantee.
 
W Cast Iron
 
 
 

W High Output

The W high output range is available in frame sizes 315 to 710, in either low voltage or high voltage. They are available with 2 pole, 4 pole, 6 pole or 8 pole speeds.

IE3 efficiency for frame sizes up to and including 375kW as set out in EN60034-30. This range is available with ingress protection to IP55, IP56 or IP65.
 
W High Output
 
 
 

Brake Motors

Brook Crompton offers the most comprehensive range of brake motors with highly competitive delivery times, due in part to its innovative brake kit concept available on W motors.
 
Brake Motors
 
 
 

Single Phase

Single phase motors are used primarily in small workshops and farms with a domestic supply. Some industrial equipment are specifically for use with a single phase electricity supply, such as fans, blowers, centrifugal pumps and high pressure washers.

Dependent on the application we are able to offer different types of single phase motors
 
Single Phase
 
 
 

Series 10

A high quality industrial standard range of electric motors with a Brook Crompton specification suitable for most industrial applications.

The aluminium motors have outputs from 0.09kW to 18.5kW in frame sizes B-DA56 to A-DA160.

The cast iron range of motors have outputs from 0.09kW to 900kW in frame sizes B-DF71M to BU-DF450, in either 2,4,6 or 8 pole speeds.
 
Series 10
 
 
 

Series 10 - Single Phase

A high quality industrial standard range of electric motors with a Brook Crompton specification suitable for most industrial applications.

The single phase capacitor start / capacitor run aluminium motors have outputs from 0.25kW to 3.0kW in frame sizes 10-TDA71 to 10-TDA100.
 
Series 10 - Single Phase
 
 
 

Ex db / eb Zone 1

The Ex db / eb range of flameproof cast iron motors cover outputs from 0.37kW to 200kW in frame sizes W-EF90 to W-EF315, in 2, 4, 6, & 8 pole speeds. ATEX approved by SGS Baseefa.
 
Ex db / eb Zone 1
 
 
 

Ex nA Zone 2

The W Ex nA non-sparking range of motors covers products with outputs from 0.18kW to 400kW in cast iron frame sizes W-DF80M to W-DF355L, in either 2,4,6 or 8 pole speeds (also available in aluminum from 71 to 180 frames).

All relevant products fully comply with the requirements of ATEX.
 
Ex nA Zone 2
 
 
 

Ex tc Zone 22

The W Ex tc dust ignition proof range of motors covers products with outputs from 0.18kW to 400kW in cast iron frame sizes W-DF80M to W-DF355L, in either 2,4,6 or 8 pole spreads (also available in aluminium from 71 to 180 frames).

All relevant products fully comply with the requirements of ATEX.
 
Ex tc Zone 22